ARK-1000

This model with lifting capacity of 1000 Kg is designed to carry light weights in a most appropriate and efficient manner for bridges and viaducts, factories and constructions sites which are not so busy.

In addition to various cabin and gate designs, the frequency check device (inverter) is used as standard for efficient power consumption, increasing the efficient life times of the rack and pinions, and gear reducer together with lower vibration like other models of us.

In this model, like all other models, construction hoists are controlled by microprocessors that work with minimum fault. On a single mast, single or double cabin can operate. It is appropriate to carry humans and loads.

Technical Specifications
Capacity 1000 Kg
Cabin Width (Inner Bread) 1.0 m – 1.4 m
Cabin Length (Inner Bread) 1.5 m – 2.5 m
Cabin Height 2.15 m
Maximum Working Height 200 m
Speed 38 m / min or 52 m / min
Engine 2 X 9,2 KW
Power 380 – 500 V, 50-60 Hz, 3 Faz

ARK-2000

ARK-2000 model with the capacity to carry 2 tons, is the product that is mostly demanded among our products as a  Construction Hoist It is designed for the work sites which are medium and high density for high productivity and heavier conditions.

The gear reducers used in this product are specially designed by us with reference to our knowledge and experiences coming from long years, and the frame is made from nodular cast iron.  

In addition to various cabin and gate designs, the Frequency Inverter is used as standard for efficient power consumption, increasing the efficient life times of the rack and pinions, and gear reducers together with lower vibration like our othe models.

In this model, like all other model hoists, the lifts are controlled by microprocessors that work with minimum fault.

In addition to manual control, we also provide full automatic control alternative as an option. Therefore, the control without an operator is possible together with lift calling from floors.

By the help of a modular cabin design, it is quite suitable for inner-shaft applications. Thus, it can easily be transported to the exterior through corridors after the facade lift bolts are uninstalled even if the top of the pits are closed.

The ARK-2000 model as a standard, also has Load Cell  like all other hoists. 

 

Technical specifications
Capacity 2000 Kg
Cabin Width (Inner Bread) 1.4 m
Cabin Length (Inner Bread) 2.5 m - 3 m
Cabin Height 2.15 m
Maximum Working Height 200 m ( Can be arbitrarily increased )
Speed 38m/min , 52m/min or 90m/min
Engine 2 X 11 KW
Power 380 – 500 V, 50-60 Hz, 3 phases

ARK-3000

It is similar with ARK-2000 model but this series has larger carrying capacity and it is suitable to carry the materials with large volumes.

Standard Equipment:
  • PLC veya Gemo
  • Load Cell
  • Frequency Inverter
  • Special Production Reducer Gears
  • Different Door Alternatives
  • Manual Control

Optional Equipment:
  • Full Automatic Control (Calling System)
  • Automatic Door
  • Flat Doors
Technical specifications
Capacity 3000 Kg
Cabin Width (Inner Bread) 1.4 m
Cabin Length (Inner Bread) 3 m - 3.4 m
Cabin Height 2.15 m
Maximum Working Height 200 m ( Can be arbitrarily increased )
Speed 38m/min , 52m/min or 90m/min
Engine 3 X 11 KW
Power 380 – 500 V, 50-60 Hz, 3 phases